13969848320
當前位置：青島佰盛儀器有限公司>>德國耶拿 Analytik Jena>>備品備件>> 402-889.557德國耶拿 Analytik Jena進樣墊
| 供貨周期 | 一周 | 規格 | 5pc |
|---|---|---|---|
| 貨號 | 402-889.557 | 應用領域 | 化工,生物產業,農業,石油,能源 |
| 主要用途 | 進樣墊 | 貨號 | 402-889.557 |
analytikjena 德國耶拿進樣隔墊 402-889.557 Sealing disk, 17 mm, for plastic cap GL 18 resp. for waste vessel of sampler, set of 5 pieces 德國耶拿 402-886.305 500µl SYR H ?8Vent 1/4"-28 RN 1,0x0,7c51 德國耶拿 402-823.056 Needle; 0.63 mm x 0.35 mm; for all types of syringes; set of 3 pieces 德國耶拿 402-886.306 Needle 1 mm x 0.7 mm; for all types of syringes, 3 pieces 德國耶拿402-889.186 Removable special needles, set of 3 pieces |
| Consumables multi EA 5000 |
| 402-889.527 Auto-Protection valve assembly, complete |
| no picture available |
| B 402-889.091 Lids for sample vials, 2 ml, set of 500 pieces |
| 402-889.652 Flow test kit |
| no picture available |
| A 402-889.182 Wires for cleaning syringe needles, set of 10 pieces |
| 402-007.513 FAST connector, 1 piece |
| (adaptor angeled for gas tubings, black) |
| 402-801.317 Fuse for furnace unitT 10 A H, 20 mm |
| 402-820.044 Air filter for membrane dryer pump (at rear side of multi EA 5000), 1 piece |
| 402-889.510 Multi purpose combustion tube |
| B 402-825.045 Tweezers, straight, truncated |
| B 402-889.092 Sample vials, 2 ml, set of 100 pieces |
| (for sample rack with 112 positions) |
| 402-889.558 PTFE filter plate, d = 25 mm (Auto protection replacement filter) Set of 5 pieces |
| 402-820.129 Oxygen and argon gas supply tubing |
| FEP, OD 6 mm (sold by meter), 1 m |
| A 402-889.306 Screw cap with hole, GL 18 |
| 402-889.557 Sealing disk, 17 mm, for plastic cap GL 18, Set of 5 pieces |
| 402-889.583 Special sealing 12 mm |
| (FAST connector at outlet of multi purpose combustion tube) |
| 402-822.118 Heat resistent gloves, 1 pair |
| Sampling modules |
| MMS 5000 |
| 402-812.374 Replacement screw |
| (mounting of autosampler on the basic unit/ ABD) |
| A 402-823.079 Removable needles for 50 and 100 μl syringes, set of 3 pieces |
| 402-886.248 Waste hose |
| A 402-889.206 Septum for rinsing vessel |
| 402-889.533 Syringe 50 μl, with removable needle, without markings |
| 402-889.534 Syringe 100 μl, with removable needle, without markings 402-889.547 Gripper for sample boats |
| Autoinjector |
| 402-889.589 Syringe 10 μl, for Autoinjector, with removable needle |
| recommended for higher element concentrations and systems with carbon module |
| 402-889.592 Syringe 100 μl, for Autoinjector, with removable needle |
| 402-889.590 Syringe 20 μl, for Autoinjector, with removable needle |
| recommeded for higher element concentrations, for systems with carbon module and for systems with only one detector module (N or S) |
| 402-889.591 Syringe 40 μl, for Autoinjector, with removable needle |
| recommended as standard syringe for N/S systems |
| A 402-889.186 Removable special needles, set of 3 pieces |
| 402-815.839 Sealing for sample port MBD |
| 402-889.671 Feed tube for MBD |
| 402-889.672 Hook for MBD |
| 402-889.670 MBD coupling tube, glass |
| 402-889.674 Quartz boat, 40 mm x 9 mm, set of 10 pieces |
| 402-889.560 Set of sealing elements horizontal 402-889.673 Sample boat, special, with downholder for special applications |
| (e. g. AOX by batch method, EC/OC determination), 10 pieces |
| Automatic boat drive - ABD |
| 402-889.551 ABD coupling tube, glass |
| 402-886.236 Sealing for sample port ABD |
| A 402-881.028 Finger-Tight-Set, 1/8" for tubing, 5 ferrules and 5 screwing |
| A 402-889.073 Feed tube, for MVS shunt/ABD |
| A 402-889.066 Hook, for MVS shunt/ABD |
| suitable from MVS serial number 509 046 and higher |
| 402-815.838 O-ring 14 mm x 4 mm for ABD |
| 402-889.674 Quartz boat, 40 mm x 9 mm, set of 10 pieces |
| 402-889.560 Set of sealing elements horizontal |
| A 402-889.050 Septum; 12.5 mm; set of 5 pieces |
| 402-889.673 Sample boat, special, with downholder for special applications |
| (e. g. AOX by batch method, EC/OC determination), 10 pieces |
| A 402-889.039 Adsorption material, set of 3 pieces |
| Gas Sampling System - GSS |
| B 402-889.148 Replacement septum for gas sampling bag 10 l, 1 piece |
| 402-820.057 Ferrule 1/16", 1 piece |
| multi EA 5000: Ferrule for special needle (PEEK), horizontal operation, 1 piece |
| 402-820.123 Ferrule for injection needle, vertical operation, 1 piece |
| B 402-889.147 Gas sampling bag 10 l for GSS and GSS type C, 1 piece |
| A 402-889.180 Injection head for GSS, LPG and GSS/LPG, vertical operation, complete |
| A 402-823.056 Needle; 0.63 mm x 0.35 mm; for all types of syringes; set of 3 pieces |
| multi EA 5000: removeable injection needle for vertical operation |
| 402-889.423 Septum perforated for special needle PEEK in horizontal operation mode |
| A 402-890.018 Special needle for GSS,LPG and GSS/LPG, horizontal operation mode, PEEK |
| LPG Module and GSS/LPG combi module |
| 402-889.439 Bubble vessel |
| 402-820.057 Ferrule 1/16", 1 piece |
| multi EA 5000: Ferrule for special needle (PEEK), horizontal operation, 1 piece |
| 402-820.123 Ferrule for injection needle, vertical operation, 1 piece |
| A 402-889.180 Injection head for GSS, LPG and GSS/LPG, vertical operation, complete |
| A 402-823.056 Needle; 0.63 mm x 0.35 mm; for all types of syringes; set of 3 pieces |
| multi EA 5000: removeable injection needle for vertical operation mode |
| A 402-815.058 Lab-type screw joint D 3.2 - GL 14, complete (red) |
| multi EA 5000: for bubble vessel |
| A 402-881.116 O-ring, i.d. = 6 mm x 3 mm |
| multi EA 5000: for screw cap GL 14 bubble vessel |
| 402-889.423 Septum perforated for special needle PEEK in horizontal operation mode |
| A 402-890.018 Special needle for GSS,LPG and GSS/LPG, horizontal operation mode, PEEK |
| 402-889.061 Extended Sulfur Calibration Kit; 0,05 - 10 mg/l |
| 402-889.060 Extended Nitrogen Calibration Kit; 0,05 - 10 mg/l B 402-889.070 Sulfur Calibration Kit (0.1 - 10 mg/l) incl. blank |
| B 402-889.167 Sulfur Calibration Kit (10 - 100 mg/l) incl. blank |
| B 402-889.164 Sulfur Calibration Kit (100 - 500 mg/l) |
| B 402-889.069 Nitrogen Calibration Kit ( 0.1 - 10 mg/l) incl. blank |
| B 402-889.165 Nitrogen Calibration Kit (10 - 100 mg/l) incl. blank |
| B 402-889.162 Nitrogen Calibration Kit (100 - 500 mg/l) |
| A 402-823.048 Membrane dryer |
| B 402-815.030 O-ring 3.0 mm x 1.5 mm (3 mm x 6 mm) set of 10 pieces |
| multi EA 5000: sealing for inner part of membrane dryer |
| Sulfur Coulometer |
| A 402-889.313 Absorber tube for Sulfur coulometer, glass |
| 402-820.110 Connecting hose 1/8", (sold by meter), 1m |
| A 402-889.302 Diaphragma for titration cell of Sulfur coulometer |
| A 402-889.308 Sealing for screw cap with hole, GL 32, Sulfur coulometer |
| A 402-889.309 Sealing for screw cap with hole, GL 14, Sulfur coulometer |
| 402-889.307 Sealing for screw cap with hole, GL 18, Sulfur coulometer |
| A 402-889.311 Gas introduction tube for titration cell of Sulfur coulometer, glass |
| A 402-520.137 Glass screw joint (gray) |
| multi EA 5000: (Screw joint for tube 8 mm) |
| A 402-889.301 Indicator electrode for titration cell of Sulfur coulometer |
| A 402-889.303 Cathode for titration cell of Sulfur coulometer |
| A 402-889.310 Stirrer bar, titration cell, Sulfur coulometer |
| 402-884.015 Packet with one charge of silver wool |
| A 402-889.305 Screw cap with hole, GL 14 for gas introduction tube and electrodes, Sulfur coulometer |
| A 402-889.306 Screw cap with hole, GL 18 |
| A 402-889.304 Screw cap with hole, GL 32 Diaphragma, Sulfur coulometer |
| A 402-889.314 Septa for titration cell for Sulfur Coulometer, set a 50 pieces |
| 402-889.300 Titration cell for Sulfur coulometer, glass |
| A 402-889.312 Fitting GL zz, for absorber tube, sulfur coulometer |
| TC/TOC-Module |
| B 402-886.311 Syringe graduated 500 μl with removable needle for manual injection |
| B 402-885.019 Halogen absorber, complete with U-tube |
| 402-810.050 Halogen absorber filling (copper- and brass wool) |
| A 402-885.017 High-temperature mat, set of 3 pieces |
| A 402-823.056 Needle; 0.63 mm x 0.35 mm; for all types of syringes; set of 3 pieces |
| multi EA 5000: removeable injection needle for vertical operation mode |
| 402-889.657 Condensation coil |
| no picture available |
| B 402-810.059 Special catalyst platinum, sufficient for 5 refills |
| A 402-810.048 Special catalyst platinum, one refill |
| B 402-886.318 Sample vials, 8 ml |
| 50 mm x 18 mm, 125 pieces |
| A 402-884.005 Pump hose for peristaltic pump, waste |
| A 402-881.006 Quartz glass cullet, coarse grains, packet of 80 g |
| A 402-825.044 Quartz wool, 1 packet |
| 402-889.659 Septum TIC vessel |
| 402-889.658 Septum combustion tube |
| no picture available |
| 402-881.245 Set of TC prefilter and water trap |
| 402-889.594 Syringe 250 μl with vent and removable needle |
| (for autosampler) |
| 402-889.593 Syringe 500 μl with vent and removable needle |
| (for autosampler) |
| 402-889.656 TIC vessel |
| A 402-825.150 U-tube, o.d. = 11 mm, without filling for halogenabsorber |
| (without connections) |
| no picture |
| available |
| 402-889.655 Combustion tube |
| Chlorine Detection |
| 402-815.831 Hose to connect suction extractor at workplace or vent |
| lengh 70 cm |
| 402-889.549 Connecting part (metal) for gas transfer line |
| with outside thread |
| 402-825.123 Beaker for sulfuric acid vessel |
| 402-889.561 Replacement hose for heated gas transfer line |
| 402-820.053 Ferrule for connecting part (metal) |
| for gas transfer line with outside thread |
| 402-820.055 Ferrule for screw joint |
| gas transfer line with inside thread |
| 402-889.559 Gas transfer hose |
| B 402-889.071 Chlorine Calibration Kit ( 0.1 - 10 mg/l) incl. blank B 402-889.166 Chlorine Calibration Kit (10 - 100 mg/l) incl. blank |
| B 402-889.163 Chlorine Calibration Kit (100 - 500 mg/l) |
| A 402-520.177 ferrule set, 1/4" TFE |
| 402-30003 Ferrule set, 1/8" PTFE |
| 402-825.124 Petri dish for sulfuric acid vessel |
| 402-889.569 Tubing inside sulfuric acid vessel with ferrule |
| 402-889.508 sulfuric acid vessel with outlet |
| 402-889.507 Safety cowl for the sulfuric acid tank |
| 402-825.108 Funnel for sulfuric acid vessel |
| 402-889.573 Connector sulfuric acid vessel |
| A 402-30031 Swagelok screw fitting, 1/4" onto 1/8", PTFE |
| Chlorine detection with chlorine module high sensitive |
| B 402-890.007 Storage vessel for sensor electrode |
| A 402-889.085 Mounting to connect suction extractor at workplace, NS |
| 14.5 brown glass |
| 402-99998 preamplifier for sensor electrode |
| A 402-889.123 Gas introduction tube |
| A 402-889.124 Set of rubber plugs; 1 x NS14, 1 x NS7 |
| A 402-889.112 Internal electrolyte sensor electrode, 50 ml |
| A 402-815.023 Magnetic stirring bar, PTFE, 30 mm x 6 mm, 1 piece |
| A 402-889.006 Platinum electrode |
| A 402-889.184 Electrolyte bridge |
| B 402-889.110 Salt solution to make up 100 ml electrolyte |
| A 402-889.002 Sensor electrode 402-889.536 Silver electrode |
| Chlorine detection with titration cells sensitive and high concentration |
| 402-889.538 Storage vessel for combination electrode |
| B 402-880.605 Disposable tube 18 mm x 6 mm, filled |
| packet of 10 pieces, for AOX determination (column method) |
| 402-890.610 Disposable quartz tubes 18 x 6, filled; set á 100 pieces for AOX determination (column method) |
| A 402-880.211 Combination electrode (ceramic) |
| A 402-815.022 Magnetic stirring bar, PTFE, 15 mm x 6 mm, 1 piece |
| 402-889.673 Sample boat, special, with downholder for special applications |
進樣隔墊 402-889.557 信息由青島佰盛儀器有限公司為您提供，關于進樣隔墊 402-889.557 報價信息，歡迎來電或留言咨詢。除供應 美國GRACE硅膠（923級）外，還可為您提供uop熒光指示劑20g/40g,美國DC精密內徑吸附柱,PCS-HFRR(備件）、PAC備件（ISL）、PAC(HERZOG)，TANNAS,XOS,CFR,Thermo ,EMCEE, AMETEK ,premier,brand,E+H備件等產品，公司有專業的客戶服務團隊，是您值得信賴的長期合作伙伴。
請輸入賬號
請輸入密碼
請輸驗證碼
以上信息由企業自行提供，信息內容的真實性、準確性和合法性由相關企業負責，化工儀器網對此不承擔任何保證責任。
溫馨提示：為規避購買風險，建議您在購買產品前務必確認供應商資質及產品質量。
化工儀器網